|
High Efficiency Separators |
|
Comparing Performance to Traditional Separators
for Black Powder Removal
|
| CPI separators are
designed for Black Powder removal. Performance is
maximized using high capacity cartridges which flow
inside to outside. Unlike standard filter separators,
solids are trapped inside the cartridges for easy
disposal. Liquids drain from the exterior of the
cartridges in a less turbulent zone and a second
stage vane pack is available to further reduce droplet
carryover. Micron ratings are available as low as
0.1 μm with solids loading abilities higher than
any other product. Vessels are horizontal with quick
opening closures. A liquid sump is located below
the vessel to store liquids from the dirty side
and clean side. |
| Traditional Filter
Separators flow outside to inside and solids accumulate
on the outside of the filters. These filters are
generally depth tubes rated 1 to 5 micron. Liquids
either fall out on the dirty side or pass through
the cartridges as coalesced droplets where they
are removed by a second stage vane pack or other
technology. Standard Filter Separators do have an
enhanced ability to remove liquid slugs because
a larger portion of the vessel is dedicated to the
dirty side where liquids can fall out. |
|
COMPARISON |
|
Item |
Standard Filter Separator |
CPI Filter Separator |
|
Dirt Holding Ability |
Low |
Very High |
|
Micron Rating |
1 to 5 |
As low as 0.1 μm |
|
Coalescing Ability |
Good |
Very Good |
|
Liquid Slug Ability |
Very Good |
Low |
|
Flow Ability |
Very Good |
Very Good |
|
Black Powder Removal |
Poor |
Very Good |
|
Economics |
Good |
Very Good |
 |
| |
Contact
us for more information
Home |
About Us
| News |
Literature |
High Flow / High Capacity Filters |
HC Filter Options
Filter Bags
|
Rental Filter Vessels |
High Efficiency
Separators |
Contact Us |
FAQ |
Links
|
